• Общие настройки
  • Шапка сайта
  • Верхний слайдер на главной
  • Блоки на главной
  • Страница каталог
  • Страница контакты
Базовый цвет
Пользовательский цвет
Оформление
Ширина сайта
1
Преимущества
2
Разделы каталога
3
Список товаров
4
Наши новости
5
Наши отзывы
6
Производители
Отображать филиалы других городов
г. Москва, Багратионовский проезд, д. 53, оф. 37
Online store for a confident start

Бренды

Filter
Brand
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
not available from stock
1 2 3
SPECTRAL

SPECTRAL materials for automotive refinishing

SPECTRAL is NOVOL’s premium range for professional body repair and automotive refinishing. Its products cover the main stages of paint restoration, from correcting surface defects and preparing the substrate to colour application and the final clear coat.

The range is intended for body shops, paint workshops, colourists and experienced private users who need predictable results and compatible components. KDV-COLOR helps customers select products for a complete repair system instead of choosing each can in isolation.

SPECTRAL materials for automotive refinishing — KDV-COLOR

SPECTRAL products and their applications

Primers prepare metal, existing coatings and suitable plastics for painting. Depending on the product, they may improve adhesion, provide corrosion protection, isolate an old finish or fill minor irregularities.

Clear coats create the final protective layer and affect gloss, colour depth and durability. Two-component products must be combined with the hardener specified in the technical data sheet and in the stated mixing ratio.

Putties restore dents, scratches and uneven areas. The correct product depends on the substrate, defect size, required flexibility and permitted layer thickness. Thinners, degreasers and other auxiliary products are equally important for avoiding adhesion and finish defects.

How to choose compatible SPECTRAL components

Check the substrate, recommended hardener or thinner, mixing ratio, application temperature, flash-off time, drying method and permitted next coat. Products from the same brand are not automatically interchangeable.

For exact values, use the TDS for the individual product. If you are building a multi-stage system, KDV-COLOR can help verify the purpose and compatibility of the selected materials.

Buy SPECTRAL at KDV-COLOR

Compare the intended use, pack size, kit contents, compatible components and price in the product cards before adding an item to your order.

How to choose SPECTRAL materials for a specific repair

Product selection should start with the condition of the panel and the required finish, not simply with price or pack size. Bare metal, an existing coating, plastic, a small local defect and a complete respray may require different preparation systems. Before ordering, identify the substrate, defect depth, repair area, application method and available drying conditions.

When several SPECTRAL products are used in one job, treat them as consecutive parts of one coating system. Each layer must be suitable for the previous surface and provide the correct base for the next operation. For every two-component product, verify the specified hardener, mixing ratio, induction time where applicable and pot life.

  • choose filling material by substrate, defect depth, flexibility and sanding method;
  • choose primer by adhesion, corrosion protection, filling ability and subsequent coating;
  • check application viscosity, flash-off time, temperature and number of coats;
  • select the finishing system by appearance, durability and compatible activators or thinners.

Recommended repair sequence

A typical body-repair process includes cleaning and degreasing, removing corrosion and unstable old paint, restoring the panel profile, sanding, priming, applying the colour coat and protecting it with the final finish. The exact operations depend on the damage and on the technical instructions for the selected SPECTRAL product.

Observe the specified flash-off and drying times before applying the next layer. Prepare the surface with the recommended abrasive grade and remove dust carefully. Premature recoating, insufficient degreasing or excessive film thickness can cause shrinkage, delamination, craters, loss of gloss or a visible repair edge.

Common application mistakes

A professional product cannot compensate for an incorrect process. Do not select a hardener only by speed, add thinner without measuring the ratio, or combine unrelated systems without confirmed compatibility. The temperatures of the material, panel and workshop affect atomisation, flow, curing and the final appearance.

Read the technical data sheet before work, prepare clean graduated mixing cups and verify spray-gun settings. A test application is advisable when matching colour, coating plastic or using a new combination of products. It allows the operator to check coverage, drying and surface appearance before working on the vehicle.

Storage and quantity planning

Keep products in tightly closed original containers away from heat, moisture and direct sunlight. Prevent contamination after opening and observe the stated storage period. Hardeners are particularly sensitive to moisture, so their containers should be closed immediately after dispensing the required amount.

Consumption depends on panel area, number of coats, coverage, transfer efficiency and application technique. Calculate the working quantity with a reasonable allowance, while avoiding excessive purchases of reactive components that may not be used within their recommended period.

Buying SPECTRAL from KDV-COLOR

Use the KDV-COLOR catalogue to compare SPECTRAL products by purpose, pack size, kit contents and current price. Check each product card for technical characteristics and related components. When assembling a complete repair package, verify the whole sequence from substrate preparation to the final protective coat.

For a more accurate recommendation, provide the vehicle or panel type, substrate, nature of the damage, approximate repair area and any products already selected. This information helps identify compatible items and reduces the risk of purchasing components that cannot be used together.

Frequently asked questions

Is SPECTRAL suitable for professional body repair?

Yes. It is a professional refinishing range, provided that the components are selected correctly and the application technology is followed.

Can I use another brand’s hardener?

Not unless the manufacturer explicitly permits it. A different hardener may change curing, hardness, flow and appearance.

Can SPECTRAL be used on plastic parts?

Yes, when the selected cleaner, adhesion promoter, putty or additive is approved for that plastic and the surface is prepared correctly.

View the KDV-COLOR catalogue